Enterasys csx200 Betriebsanweisung
CSX200 Configuration with QuickSET
CSX200 Family User’s Guide
73
IP Routing Configuration
This section describes the fields in the IP Routing Configuration section of the Routing
configuration window.
configuration window.
Interface # —
Displays an active interface number assigned an IP subnet.
Remote LAN Subnet —
Displays the IP subnet for the remote router. Place the cursor in this
field and type the IP subnet of the remote router.
Subnet Mask —
Displays the Subnet Mask assigned to the interface number.
Next Hop —
The Next Hop is the IP address of the IP port of the next router (in the direction of
the subnet that you are defining).
Default Route... —
Displays the Default Route window. You may select one interface to be a
default route. A default route forwards all packets that are not defined in the routing table to the
interface defined in the Default Route window in (unnumbered routing only).
interface defined in the Default Route window in (unnumbered routing only).
To set up a default route in Numbered Mode communication, click the Add Route... button and
enter IP Subnet 000.000.000.000, and Subnet Mask 255.255.255.255. Then use the NEXT HOP
window to enter the IP Address of the router you wish to designate as the default route.
enter IP Subnet 000.000.000.000, and Subnet Mask 255.255.255.255. Then use the NEXT HOP
window to enter the IP Address of the router you wish to designate as the default route.
Add Route —
This button allows you to add a route and to configure the CSX200 to forward
only those packets from the specified route.
Delete... —
This button allows you to delete a route.
Advanced —
This button allows you to access the Advanced Routing configuration window.
IPX Routing Configuration
This section describes the fields in the IPX Routing Configuration section of the Routing
configuration window that is used to assign an IPX network number.
configuration window that is used to assign an IPX network number.
Interface # —
Displays all interface numbers which can be assigned an IPX network number.
Network # —
Displays the active IPX network number assigned to an interface.
Host Map... —
The IPX Host Map button takes you to the IPX Host Map window. IPX Host Map
entries are used for IPX routing in Frame Relay mode only.