Enterasys csx200 Betriebsanweisung
CSX200 Configuration with QuickSET
74
CSX200 Family User’s Guide
Modify... —
Use this button to change an entry in the IPX Routing Configuration window. Select
the interface number to modify by clicking on the tab to the left of the interface number.
Host Map Window
The Host Map window shown in
displays after clicking on the Host Map... button in
the (IP/IPX) Routing configuration window. Host Map entries are used for IPX routing using
Frame Relay Protocol only. The IPX Host Map is a database of remote IPX hosts, defined
(generally) by the WAN Network number and MAC Address, and (more specifically) by the
Interface Number and Data Link Connection Identifier (DLCI). The DLCI and Interface Number
define the switched connection to the Telco central office. Enter the remote WAN MAC address
and the remote Router’s WAN Network number.
Frame Relay Protocol only. The IPX Host Map is a database of remote IPX hosts, defined
(generally) by the WAN Network number and MAC Address, and (more specifically) by the
Interface Number and Data Link Connection Identifier (DLCI). The DLCI and Interface Number
define the switched connection to the Telco central office. Enter the remote WAN MAC address
and the remote Router’s WAN Network number.
Figure 32
Host Map Window
This section describes the fields in the IP Advanced configuration window.
Interface # —
Displays the active interface number. The interface number is a two-digit decimal
number related to the Frame Relay Time Slot.