Enterasys 9f106-02 Betriebsanweisung
Installing the MicroLAN Module
2-6
Table 2-1. Function of DIP Switch
Switch
Function
Description
8
None
Not Used
7
None
Not Used
6
None
Not Used.
5
FNB-2
Autoconnect On
The module will open a connection to the
FNB-2 ring upon insertion to the chassis. The
FNB ring will wrap if there is no active link on
the front panel port.
FNB-2 ring upon insertion to the chassis. The
FNB ring will wrap if there is no active link on
the front panel port.
4
FNB-1
Autoconnect On
The module will open a connection to the
FNB-1 ring upon insertion to the chassis. The
FNB ring will wrap if there is no active link on
the front panel port.
FNB-1 ring upon insertion to the chassis. The
FNB ring will wrap if there is no active link on
the front panel port.
3
FNB-2
Autoconnect Off
The module will not enable a connection into
FNB-2 until a connection is present on the
front panel port. This is the factory default.
FNB-2 until a connection is present on the
front panel port. This is the factory default.
2
FNB-1
Autoconnect Off
The module will not enable a connection into
FNB-1 until a connection is present on the
front panel port. This is the factory default.
FNB-1 until a connection is present on the
front panel port. This is the factory default.
1
None
Not Used
If two 9F106-02 modules are connected together though the front panel ports, one module
must have Autoconnect On.
must have Autoconnect On.
!
CAUTION