Enterasys 9f106-02 Betriebsanweisung

 

2-7

Installing an FPIM

 

The 9F106-02 MicroLAN module is shipped without FPIMs. To install an FPIM, 
follow the procedure below:

1.

Remove the module if it is installed in the MMAC-Plus chassis.

2.

Remove the blank front cover over the FPIM slot.

3.

Install the FPIM as shown in Figure 2-5. Ensure that the rear connector is 
seated firmly before tightening the two mounting screws.

 

Figure 2-5. Installing an FPIM