Enterasys atx Verweisanleitung
![Enterasys](https://files.manualsbrain.com/attachments/0d61cd0d9a60e36f1a6c1364af6a0a9788bcf75b/common/fit/150/50/0c43aa9c6913c8f0c68912f62e6506afc95280a8d9a1fc71e52e7f54646e/brand_logo.jpeg)
ATX Group
ATX MIB Reference Guide
10-13
10.3.2
Software Configuration Group
sw
{ecs-1 2}
This attribute group supplies information which describes the software
configuration of this particular ATX.
configuration of this particular ATX.
swNumber
{sw 1}
Integer Read-Only
The number of file sets. This number is fixed as 2.
swFilesetTable
{sw 2}
Not-Accessible
A list of the software file sets stored in the ATX. The first file set refers to the file
set that was used when the ATX last booted. The second file set refers to the file
set that will be used when the ATX reboots or reloads any hardware module.
[Since IOM hardware modules may be re-started after the unit has booted, the
software which is executing on an IOM may be different than the software that
was used when the unit booted.].
set that was used when the ATX last booted. The second file set refers to the file
set that will be used when the ATX reboots or reloads any hardware module.
[Since IOM hardware modules may be re-started after the unit has booted, the
software which is executing on an IOM may be different than the software that
was used when the unit booted.].
swFileset
{swFilesetTable 1}
Not-Accessible
A set of objects for each file set. The individual components are described below.
swIndex
{swFileset 1}
Integer Read-Only
The file set number, beginning with 1 for the first file set. This number always
matches the instance of the swFiles. For example, {swIndex 2} contains the value
“2”.
matches the instance of the swFiles. For example, {swIndex 2} contains the value
“2”.
swValid
{swFileset 2}
Obsolete
swDesc
{swFileset 3}
Octet String Read-Only
The description (0-32 bytes) of the software file set.
swCount
{swFileset 4}
Integer Read-Only
The number of files in the file set. This number may range from 1 to 255.