Enterasys atx Verweisanleitung

swFlashBank

{swFileset 9}

Integer Read-Only 

The bank number where the software file set resides. The possible values are: 

•

first-bank (1)

•

second-bank (2)

admin

{ecs-1 3}

This group contains the attributes for configuring the system level control of the 
entire ATX and the overall ATX status. 

config

{admin 1}

This group of variables is used by the NMS to learn and modify the configuration 
status of the entire unit.

configFatalErr

{config 1}

Octet String Read-Only 

This is a 32 byte array which contains information about the cause of the 
previous system reset. This will describe the circumstances which forced the 
system software to perform a reboot. The values in the first byte have the 
following meanings:

•

 (0) - Power failure (remaining 31 bytes are not applicable).

•

 (1) - Watchdog Timeout (next byte contains the hwIndex of the module which 
stopped responding; remaining 30 bytes are not applicable).

•

 (2) - NMS Requested Shutdown (next byte contains the hwIndex of the 
Packet Processing Engine; next two bytes are not applicable; next four bytes 
contain the NMS’s IP address; remaining 24 bytes are not applicable).

•

 (3-255) - Fatal Error (next byte contains the hwIndex of the module which 
encountered the error; remaining 30 bytes contain additional information).