Enterasys atx Verweisanleitung
IP Group
ATX MIB Reference Guide
2-11
ipReasmOKs
{ip 15}
Counter Read-Only
The number of IP datagrams which were successfully reassembled.
ipReasmFails
{ip 16}
Counter Read-Only
The number of failures (for whatever reason timed-out, errors, etc.) detected by
the IP reassembly algorithm. This is not necessarily a count of discarded IP
fragments since some algorithms (notably RFC 815’s) can lose track of the
number of fragments by combining them as they are received.
the IP reassembly algorithm. This is not necessarily a count of discarded IP
fragments since some algorithms (notably RFC 815’s) can lose track of the
number of fragments by combining them as they are received.
ipFragOKs
{ip 17}
Counter Read-Only
The number of IP datagrams that have been successfully fragmented within this
unit.
unit.
ipFragFails
{ip 18}
Counter Read-Only
The number of IP datagrams that have been discarded because they needed to be
fragmented but could not be (e.g. because their “Don’t Fragment” flag was set).
fragmented but could not be (e.g. because their “Don’t Fragment” flag was set).
ipFragCreates
{ip 19}
Counter Read-Only
The number of IP datagram fragments that have been generated by this unit.
2.4.1 IP Address Table
The TCP/IP IP Address Table contains the IP addressing information for each
port. The parameters are described below.
port. The parameters are described below.
ipAddrTable
{ip 20}
Not-Accessible
A list of IP address entries; one per IP address. If a port has not yet learned its IP
address, then an ipAddrEntry might not exist for the port (i.e., having an
ipAddrEntry with an IP address of zero is not acceptable).
address, then an ipAddrEntry might not exist for the port (i.e., having an
ipAddrEntry with an IP address of zero is not acceptable).
ipAddrEntry
{ipAddrTable 1}
Not-Accessible
A set of objects for an ipAddrTable entry. The individual components are
described below.
described below.