Enterasys atx Verweisanleitung
IP Group
ATX MIB Reference Guide
2-13
2.4.2 IP Routing Table
The TCP/IP IP routing table contains the routing information for each route
currently known by the unit. When adding a row, the entire row must be
specified, except for the following defaults:
currently known by the unit. When adding a row, the entire row must be
specified, except for the following defaults:
•
ipRouteDest is obtained from the row’s instance identifier
•
ipRouteMetric1 defaults to 0
•
ipRouteMetric2 defaults to ppeStaticPreference
•
ipRouteMetric3 through ipRouteMetric5 default to -1
•
ipRouteNextHop is obtained from the row’s instance identifier
•
ipRouteType defaults to “direct”
•
ipRouteProto defaults to “netmgmt”
•
ipRouteMask defaults to the standard network class mask based on the row’s
instance identifier (except 255.255.255.255 is used if the row’s instance
identifier contains a non-zero host portion)
instance identifier (except 255.255.255.255 is used if the row’s instance
identifier contains a non-zero host portion)
Parameters include the following variables.
ipRouteTable
{ip 21}
Not-Accessible
A list of routing entries; one per route. An entry is keyed by an IP address
(ipRouteDest, defined below). If there are multiple entries for the same IP
address, then only the entry being used by the IP forwarding process is available
for SNMP access.
(ipRouteDest, defined below). If there are multiple entries for the same IP
address, then only the entry being used by the IP forwarding process is available
for SNMP access.
ipRouteEntry
{ipRouteTable 1}
Not-Accessible
A set of objects for an ipRouteTable entry. The individual components are
described below.
described below.
ipRouteDest
{ipRouteEntry 1}
IP Address Read-Write
The destination IP address of this route.
ipRouteIfIndex
{ipRouteEntry 2}
Integer Read-Write
The port number of the next hop.