Enterasys fn100 Betriebsanweisung

If you are connecting the FN100 to a device that has a straight-through 
design, the two pairs of wires must be straight-through, as shown in 
Table A-7.

If you are connecting the FN100 to a device that also has an internal 
crossover design, a crossover must be implemented in the wiring, as 
shown in Table A-8.

Between any two nodes (such as PCs or other stations) on the network, 
there may be limitations or restrictions that you should be aware of. For 
more information on limitations and restrictions, see the IEEE 802.3 
specification.

1 (Tx+) 

1 (Tx+)

2 (Tx-) 

2 (Tx-)

3 (Rx+) 

3 (Rx+)

6 (Rx-) 

6 (Rx-)

1 (Tx+) 

3 (Rx+)

2 (Tx-) 

6 (Rx-)

3 (Rx+) 

1 (Tx+)

6 (Rx-) 

2 (Tx-)