Enterasys b2g124-24 Benutzerhandbuch
Connecting AC and RPS-SYS Power
SecureStack B2 Installation Guide 3-17
C2RPS-SYS Redundant Power System
If you are installing an optional redundant power system (C2RPS‐SYS), refer to the
installation instructions supplied with the SecureStack RPS. The switch is connected to a
C2RPS‐PSM using a C2RPS‐PSM Cable.
installation instructions supplied with the SecureStack RPS. The switch is connected to a
C2RPS‐PSM using a C2RPS‐PSM Cable.
If you are installing the switch as a standalone switch, proceed to “
” on page 3‐18. If you are installing switches in a stack
configuration, apply power to each switch in order, according to the procedure you use in
“
“
Stack Initialization Overview
When you install and connect all the high‐speed stacking cables to the switches in the
stack before applying power to the switches, the following occurs:
stack before applying power to the switches, the following occurs:
•
The switch that will manage (Manager) the stack is automatically established with all
other switches established as Member switches in the stack. When the switches
complete their initializations, one of the switches in the stack will illuminate its
Manager LED, indicating that it is the stack Manager. The Manager LED on each
Member switch will be off.
other switches established as Member switches in the stack. When the switches
complete their initializations, one of the switches in the stack will illuminate its
Manager LED, indicating that it is the stack Manager. The Manager LED on each
Member switch will be off.
•
The hierarchy of the switches that will function as backup Manager is also determined
in case the current Manager malfunctions, is powered down, or is disconnected from
the stack.
in case the current Manager malfunctions, is powered down, or is disconnected from
the stack.
•
The Console port on each Member switch is deactivated. Only the Console port on the
Manager switch is active for out‐of band configuration to set the IP address,
password, and other configuration settings.
Manager switch is active for out‐of band configuration to set the IP address,
password, and other configuration settings.
Once you know which switch is the Manager, proceed to “
Caution: To prevent damaging the switch, DO NOTconnect a Power over
Ethernet-compliant Redundant Power System (C2RPS-POE) to the redundant power
supply connector. The switch is only compatible with the SecureStack C2RPS-SYS
redundant power supply system.
Ethernet-compliant Redundant Power System (C2RPS-POE) to the redundant power
supply connector. The switch is only compatible with the SecureStack C2RPS-SYS
redundant power supply system.
Precaución: No conecte una fuente de poder redundante (RPS) SecureStack C2 PoE
(C2RPS-POE) al cable de corriente. De lo contrario, el dispositivo puede dañarse.
(C2RPS-POE) al cable de corriente. De lo contrario, el dispositivo puede dañarse.