Enterasys 6a000 Verweisanleitung
SmartCell 6A000/ZX-250 Reference Manual 1-7
Introduction
With [IndexNumber], [PortNumber], [Client Number], and other parameters that default to “ALL”, unless you specify
a number at that input field, the switch gives ALL information pertaining to that parameter field.
a number at that input field, the switch gives ALL information pertaining to that parameter field.
Descriptions
[ATM Address] ATM address assigned to the port,
client, or server according to ATM
Forum specifications.
Forum specifications.
13-20 bytes. Hex-based,
dot-decimal format separated by
colons/
59 characters
dot-decimal format separated by
colons/
59 characters
usually no default
[ClientNumber] Number of the client. Each client on
the switch must have a unique client
number. Client numbers are shared
between LAN emulation (LANE)
clients and IP/ATM (IP over ATM)
clients.
number. Client numbers are shared
between LAN emulation (LANE)
clients and IP/ATM (IP over ATM)
clients.
0 through 127/
Up to 3 characters
Up to 3 characters
ALL
:"*dF˜s_T
&F’4•az›apm˜:"*dF˜'¨zd"m"›apm
3zF•"›p•
6"•"hF›F•’—6F•ha’’apm’
&F’4•az›apm
console
command
[InputParameter]
<whatyoutype>
(Privilege level this console command
allows:)
Administrator or All
allows:)
Administrator or All
This section provides detailed descriptions of the command
(operator and switch attribute) and discusses what the
command does and how and when it is used. Other relevant
information appears here.
(operator and switch attribute) and discusses what the
command does and how and when it is used. Other relevant
information appears here.
:"*dF˜s_•
6"•"hF›F•˜:"*dF˜'¨zd"m"›apm˜|%pm›am¤F=}
6"•"hF›F•
&F’4•az›apm
="d¤F—)aFd=˜9a«F
&FO"¤d›