Zhone 2004 Betriebsanweisung
C o n f i g u r a t i o n
4-23
Figure 4.20
DHCP Relay Menu
Each option on this menu is described in detail below.
Enable/Disable DHCP
Relay
When you enable DHCP Relay, you must provide a DHCP server IP address.
To enable or disable DHCP Relay, follow the steps below:
To enable or disable DHCP Relay, follow the steps below:
1
On the DHCP Relay menu, type “E” to select Enable/Disable DHCP Relay.
The IAD displays the current status and prompts you to change it.
The IAD displays the current status and prompts you to change it.
2
Type “E” to enable DHCP Relay on this port, or “D” to disable it.
3
The IAD displays the current DHCP server IP address and prompts you to
enter a new address.
enter a new address.
4
Type the new DHCP Server IP address. The IAD saves the changes and
displays the Router Configuration menu (Figure 4.16).
displays the Router Configuration menu (Figure 4.16).
5
Continue with other configuration tasks, or press Escape to return to the
Main menu.
Main menu.
Configure DHCP
Relay
To configure the DHCP Relay, follow the steps below.
1
On the DHCP Relay menu, type “C”. The IAD displays the current IP
address and prompts you to enter a new address.
address and prompts you to enter a new address.
2
Type the new DHCP Server IP address. The IAD saves the changes and
displays the Router Configuration menu (Figure 4.16).
displays the Router Configuration menu (Figure 4.16).
3
Continue with other configuration tasks, or press Escape to return to the
Router Modification menu.
Router Modification menu.
Display DHCP Relay
Statistics
To display information about DHCP, follow the steps below.
1
Type “S” on the DHCP Relay menu (Figure 4.20). When DHCP Relay is
enabled, the IAD displays a report such as the one below.
enabled, the IAD displays a report such as the one below.
2
Press any key to return to the DNS Client menu when you have finished
reviewing the information.
reviewing the information.