ZyXEL p-660h-61 Betriebsanweisung

Prestige 660H Series User’s Guide 

 

WAN Setup  

                                                             6-5

 

 

Connection  
(PPPoA and PPPoE 
encapsulation only)

 

 The schedule rule(s) in SMT menu 26 have priority over your Connection settings. 

Nailed-Up Connection  Select Nailed-Up Connection when you want your connection up all the time. The 

Prestige will try to bring up the connection automatically if it is disconnected. 

Connect on Demand  Select Connect on Demand when you don't want the connection up all the time and 

specify an idle time-out in the Max Idle Timeout field. 

Max Idle Timeout  Specify an idle time-out in the Max Idle Timeout field when you select Connect on 

Demand. The default setting is 0, which means the Internet session will not timeout. 

PPPoE Pass Through  This field is available when you select PPPoE encapsulation.  

PPPoE + 

PPPoE_Client_PC 

(PPPoE encapsulation 

only) 

In addition to the Prestige's built-in PPPoE client, you can enable PPPoE pass through to 
allow up to ten hosts on the LAN to use PPPoE client software on their computers to 
connect to the ISP via the Prestige. Each host can have a separate account and a public 
WAN IP address.  

PPPoE pass through is an alternative to NAT for application where NAT is not appropriate.

Disable PPPoE pass through if you do not need to allow hosts on the LAN to use PPPoE 
client software on their computers to connect to the ISP. 

Subnet Mask  
(ENET ENCAP 
encapsulation only) 

Enter a subnet mask in dotted decimal notation.  

Refer to the Subnetting appendix on how to calculate a subnet mask If you are 
implementing subnetting. 

ENET ENCAP 
Gateway 
(ENET ENCAP 
encapsulation only) 

You must specify a gateway IP address (supplied by your ISP) when you select ENET 
ENCAP in the Encapsulation field 

Back 

Click Back to return to the previous screen. 

Apply

 

Click Apply to save the changes. 

 

Cancel

 

Click Cancel to begin configuring this screen afresh.

 

Traffic redirect forwards traffic to a backup gateway when the Prestige cannot connect to the Internet. 
An example is shown in the figure below.