ZyXEL p-660h-61 Guia Do Utilizador
Prestige 660H Series User’s Guide
WAN Setup
6-5
Table 6-1 WAN Setup
LABEL DESCRIPTION
Connection
(PPPoA and PPPoE
encapsulation only)
(PPPoA and PPPoE
encapsulation only)
The schedule rule(s) in SMT menu 26 have priority over your Connection settings.
Nailed-Up Connection Select Nailed-Up Connection when you want your connection up all the time. The
Prestige will try to bring up the connection automatically if it is disconnected.
Connect on Demand Select Connect on Demand when you don't want the connection up all the time and
specify an idle time-out in the Max Idle Timeout field.
Max Idle Timeout Specify an idle time-out in the Max Idle Timeout field when you select Connect on
Demand. The default setting is 0, which means the Internet session will not timeout.
PPPoE Pass Through This field is available when you select PPPoE encapsulation.
PPPoE +
PPPoE_Client_PC
(PPPoE encapsulation
only)
In addition to the Prestige's built-in PPPoE client, you can enable PPPoE pass through to
allow up to ten hosts on the LAN to use PPPoE client software on their computers to
connect to the ISP via the Prestige. Each host can have a separate account and a public
WAN IP address.
allow up to ten hosts on the LAN to use PPPoE client software on their computers to
connect to the ISP via the Prestige. Each host can have a separate account and a public
WAN IP address.
PPPoE pass through is an alternative to NAT for application where NAT is not appropriate.
Disable PPPoE pass through if you do not need to allow hosts on the LAN to use PPPoE
client software on their computers to connect to the ISP.
client software on their computers to connect to the ISP.
Subnet Mask
(ENET ENCAP
encapsulation only)
(ENET ENCAP
encapsulation only)
Enter a subnet mask in dotted decimal notation.
Refer to the Subnetting appendix on how to calculate a subnet mask If you are
implementing subnetting.
implementing subnetting.
ENET ENCAP
Gateway
(ENET ENCAP
encapsulation only)
Gateway
(ENET ENCAP
encapsulation only)
You must specify a gateway IP address (supplied by your ISP) when you select ENET
ENCAP in the Encapsulation field
ENCAP in the Encapsulation field
Back
Click Back to return to the previous screen.
Apply
Click Apply to save the changes.
Cancel
Click Cancel to begin configuring this screen afresh.
6.6 Traffic Redirect
Traffic redirect forwards traffic to a backup gateway when the Prestige cannot connect to the Internet.
An example is shown in the figure below.
An example is shown in the figure below.