ZyXEL nbg-4615 Betriebsanweisung

Chapter 21 Static Route

NBG4615 User’s Guide

Click Network > Static Route to open the IP Static Route screen. 

Figure 110   Network > Static Route

The following table describes the labels in this screen. 

Table 69   Network > Static Route

Static Routing Settings
Route Name

Enter a the name that describes or identifies this route.

Destination IP 
Address

Enter the IP network address of the final destination.

IP Subnet 
Netmask

This is the subnet to which the route’s final destination belongs.

Gateway IP 
Address

Enter the IP address of the gateway. 

Metric

Assign a number to identify the route.

Interface

Select the interface through which the traffic is routed. 

Add Rule

Click this to add the IP static route.

Application Rules Summary
No.

This is the number of an individual static route.

Active

The rules are always on and this is indicated by the icon.

Name

This is the name that describes or identifies this route. 

Destination

This parameter specifies the IP network address of the final destination. 
Routing is always based on network number. 

Gateway

This is the IP address of the gateway. The gateway is a router or switch 
on the same network segment as the device's LAN or WAN port. The 
gateway helps forward packets to their destinations.

Metric

This is the number assigned to the route.