ZyXEL nbg-4615 Guía Del Usuario
Chapter 21 Static Route
NBG4615 User’s Guide
190
21.2 IP Static Route Screen
Click Network > Static Route to open the IP Static Route screen.
Figure 110 Network > Static Route
The following table describes the labels in this screen.
Table 69 Network > Static Route
LABEL
DESCRIPTION
Static Routing Settings
Route Name
Route Name
Enter a the name that describes or identifies this route.
Destination IP
Address
Address
Enter the IP network address of the final destination.
IP Subnet
Netmask
Netmask
This is the subnet to which the route’s final destination belongs.
Gateway IP
Address
Address
Enter the IP address of the gateway.
Metric
Assign a number to identify the route.
Interface
Select the interface through which the traffic is routed.
Add Rule
Click this to add the IP static route.
Application Rules Summary
No.
No.
This is the number of an individual static route.
Active
The rules are always on and this is indicated by the icon.
Name
This is the name that describes or identifies this route.
Destination
This parameter specifies the IP network address of the final destination.
Routing is always based on network number.
Routing is always based on network number.
Gateway
This is the IP address of the gateway. The gateway is a router or switch
on the same network segment as the device's LAN or WAN port. The
gateway helps forward packets to their destinations.
on the same network segment as the device's LAN or WAN port. The
gateway helps forward packets to their destinations.
Metric
This is the number assigned to the route.