ZyXEL p-330w Betriebsanweisung

ZyXEL P-330W User’s Guide

Chapter 5 Wireless

50

Figure 24   Wireless: Basic Settings 

The following table describes the basic wireless LAN labels in this screen.

Table 17   Wireless: Basic Settings

Disable Access 

Point

Select this check box to disable the wireless LAN capabilities of your P-330W.

Band

Choose the operating mode of your wireless access point.  2.4Ghz (B+G) offers the 

greatest compatibility.  2.4 GHz (B) will only allow 802.11b clients to connect to the 

wireless LAN.  2.4 GHz (G) will only allow 802.11g clients to connect to the wireless 

LAN.

Mode

Mode allows you to change the wireless behavior of the P-330W.  AP allows wireless 

clients to connect to the P-330W.  Client mode activates the Wireless ISP mode of 

the router.  Use this mode to connect to a WISP or metro-area wireless network. 

Network Type

Used when operating in Client mode.  This allows you to switch between 

Infrastructure and Ad Hoc networking modes.

SSID

(Service Set IDentity) The SSID identifies the Service Set with which a wireless 

station is associated. Wireless stations associating to the access point (AP) must 

have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII 

characters) for the wireless LAN. 

Note: If you are configuring the P-330W from a computer connected 
to the wireless LAN and you change the P-330W’s SSID or WEP 
settings, you will lose your wireless connection when you press Apply 
to confirm. You must then change the wireless settings of your 
computer to match the P-330W’s new settings.

Channel 

Number

To manually set the P-330W to use a channel, select a channel from the drop-down 

list box. 

Associated 

Clients

Click Show Active Clients to be shown a list of wireless clients currently connected 

to the Wireless LAN

Save

Click Save to save your changes back to the P-330W.

Reset

Click Reset to reload the previous configuration for this screen.