ZyXEL p-330w Guida Utente
ZyXEL P-330W User’s Guide
Chapter 5 Wireless
50
Figure 24 Wireless: Basic Settings
The following table describes the basic wireless LAN labels in this screen.
Table 17 Wireless: Basic Settings
LABEL
DESCRIPTION
Disable Access
Point
Select this check box to disable the wireless LAN capabilities of your P-330W.
Band
Choose the operating mode of your wireless access point. 2.4Ghz (B+G) offers the
greatest compatibility. 2.4 GHz (B) will only allow 802.11b clients to connect to the
wireless LAN. 2.4 GHz (G) will only allow 802.11g clients to connect to the wireless
LAN.
Mode
Mode allows you to change the wireless behavior of the P-330W. AP allows wireless
clients to connect to the P-330W. Client mode activates the Wireless ISP mode of
the router. Use this mode to connect to a WISP or metro-area wireless network.
Network Type
Used when operating in Client mode. This allows you to switch between
Infrastructure and Ad Hoc networking modes.
SSID
(Service Set IDentity) The SSID identifies the Service Set with which a wireless
station is associated. Wireless stations associating to the access point (AP) must
have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII
characters) for the wireless LAN.
Note: If you are configuring the P-330W from a computer connected
to the wireless LAN and you change the P-330W’s SSID or WEP
settings, you will lose your wireless connection when you press Apply
to confirm. You must then change the wireless settings of your
computer to match the P-330W’s new settings.
to the wireless LAN and you change the P-330W’s SSID or WEP
settings, you will lose your wireless connection when you press Apply
to confirm. You must then change the wireless settings of your
computer to match the P-330W’s new settings.
Channel
Number
To manually set the P-330W to use a channel, select a channel from the drop-down
list box.
Associated
Clients
Click Show Active Clients to be shown a list of wireless clients currently connected
to the Wireless LAN
Save
Click Save to save your changes back to the P-330W.
Reset
Click Reset to reload the previous configuration for this screen.