ZyXEL nbg-5715 Betriebsanweisung

Chapter 10 WAN

NBG5715 User’s Guide

This screen displays when you select ENET ENCAP (Ethernet encapsulation).

Network > WAN > Broadband: ENET ENCAP

The following table describes the labels in this screen.

Network > WAN > Broadband: ENET ENCAP

ISP Parameters for Internet Access

Encapsulation

Choose the ENET ENCAP (Ethernet encapsulation) option when the WAN port is 
used as a regular Ethernet.

Obtain an IP 
Address 
Automatically

Select this option If your ISP did not assign you a fixed IP address. This is the 
default selection. 

Static IP Address

Select this option If the ISP assigned a fixed IP address. 

IP Address

Enter your WAN IP address in this field if you selected Static IP Address. 

Subnet Mask

Enter the Subnet Mask in this field.

Gateway IP 

Address

Enter a Gateway IP Address (if your ISP gave you one) in this field.

First DNS Server

Second DNS 
Server

Select Obtained From ISP if your ISP dynamically assigns DNS server 
information (and the NBG5715's WAN IP address). The field to the right displays 
the (read-only) DNS server IP address that the ISP assigns. 

Select User-Defined if you have the IP address of a DNS server. Enter the DNS 
server's IP address in the field to the right. If you chose User-Defined, but 
leave the IP address set to 0.0.0.0, User-Defined changes to None after you 
click Apply. If you set a second choice to User-Defined, and enter the same IP 
address, the second User-Defined changes to None after you click Apply. 

Select None if you do not want to configure DNS servers. If you do not 
configure a DNS server, you must know the IP address of a computer in order to 
access it.