ZyXEL nbg-5715 Betriebsanweisung
Chapter 10 WAN
NBG5715 User’s Guide
76
The following table describes the labels in this screen.
Table 24
Network > WAN > Broadband: PPPoE
LABEL
DESCRIPTION
ISP Parameters for Internet Access
Encapsulation
Select PPPoE if you connect to your Internet via dial-up.
PPP Information
PPP Username
Type the user name given to you by your ISP.
PPP Password
Type the password associated with the user name above.
PPP Auto
Connect
Connect
Select this option if you do not want the connection to time out.
IDLE Timeout
This value specifies the time in minutes that elapses before the router
automatically disconnects from the PPPoE server.
automatically disconnects from the PPPoE server.
PPPoE Service
Name
Name
Enter the name of your PPPoE service here.
WAN IP Address Assignment
Get
automatically
from ISP
automatically
from ISP
Select this option If your ISP did not assign you a fixed IP address. This is the
default selection.
default selection.
Use Fixed IP
Address
Address
Select this option If the ISP assigned a fixed IP address.
My WAN IP
Address
Address
Enter your WAN IP address in this field if you selected Use Fixed IP Address.
DNS Server
First DNS Server
Second DNS
Server
Server
Select From ISP if your ISP dynamically assigns DNS server information (and the
NBG5715's WAN IP address). The field to the right displays the (read-only) DNS
server IP address that the ISP assigns.
NBG5715's WAN IP address). The field to the right displays the (read-only) DNS
server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the DNS
server's IP address in the field to the right. If you chose User-Defined, but leave
the IP address set to 0.0.0.0, User-Defined changes to None after you click
Apply. If you set a second choice to User-Defined, and enter the same IP
address, the second User-Defined changes to None after you click Apply.
server's IP address in the field to the right. If you chose User-Defined, but leave
the IP address set to 0.0.0.0, User-Defined changes to None after you click
Apply. If you set a second choice to User-Defined, and enter the same IP
address, the second User-Defined changes to None after you click Apply.
Select None if you do not want to configure DNS servers. If you do not configure
a DNS server, you must know the IP address of a computer in order to access it.
a DNS server, you must know the IP address of a computer in order to access it.
Apply
Click Apply to save your changes back to the NBG5715.
Cancel
Click Cancel to begin configuring this screen afresh.