Brother HL-2700CN Benutzeranleitung

CONTROL PANEL   3 - 7

The following table shows the printer status messages that are displayed during normal operation: 

When you use the Menu buttons (+, -, Set or Back), remember the following basic steps: 

■

If no control panel operations are performed for 30 seconds, the LCD automatically returns to Ready 
state.

■

When you press the Set button to choose a setting, an asterisk appears briefly at the end of the 
display. After that, the display returns to the previous menu level.

■

After changing the status or a setting, pressing the Back button before you press the Set button will 
cause the display to return to the previous menu level with the original settings unchanged.

■

There are two ways to input numbers. You can press the + or - button to scroll up or down one 
number at a time, or you can hold down + or - to scroll faster. The blinking number is the one that you 
can change.

READY

Ready to print.

PRINTING

Printing.

RESOLUTION ADAPT

Printing with reduced resolution.

PROCESSING

Busy processing data.

JOB CANCELLING

Cancelling the job.

PAUSE

The printer has suspended its operations. Press the 

 button to start the printer 

again.

WARMING UP

The printer is warming up.

SLEEP

In sleep status

PRESS SET TO PRINT

Press the 

 button to start printing.

RESET TO FACTORY 
SETTING

The printer settings return to the factory settings.

SELF TEST

Performing self-diagnostics.

RAM SIZE=xxMB

This printer has XX MB memory.

NOW INITIALIZING

The printer is setting up.

PROGRAMING-WAIT

Accessing CompactFlash card.