Argox AS-8000 Gebrauchsanleitung

 5

 

Follow these instructions to link the two devices: 
 
1. 

Connect power to the cradle. The radio LED (marked 
with a light symbol) will blink amber and the cradle will 
beep. 
 

2. 

To ensure the cradle is unlinked from any other imager, 
check if the cradle send inquiry beep or not (see Inquiry 
Beep Control in page 18). 
 

3. 

Read the link label on the bottom of the cradle with the 
imager. The imager will sound a good read beep and 
the LED will flash amber. 
 

4. 

Re-place the imager in the cradle to continue the 
charge. 

 
Once an imager is linked to a cradle, they will remain linked 
until specific action is taken to unlink them (see Unlinking). 
They will remain linked if the cradle is unplugged, if the 
battery is removed from the imager or if the entire charge is 
used up, and if the imager is taken out of range of the cradle. 
Under normal operation, scanning of the link label will only be 
required once in the life of the product.