OKI c3530 Installationsanweisungen

8

The fax facility of this MFP will automatically answer the incoming ringtone after the 

delay period set by the ring response
The factory default for ring response is 1 ring. This can be set up to 20 seconds in the 

Admin Menu as follows (you need to have administrator rights to alter this setting):
1.

In the top level screen, scroll down to Menu and select using the Enter key.

2.

In the drop down menu, scroll down to the Admin Menu and select using the 

Enter key. Enter the password.

3.

In the drop down menu, scroll down to Fax Setup and select using the Enter 

key.

4.

In the drop down menu, scroll down to Basic Setup and select using the Enter 

key.

5.

In the drop down menu, scroll down to the Ring Response and select using 

the Enter key.

6.

In the drop down menu, scroll down to the response time required and select 

using the Enter key.

7.

Using the Left arrow key, return to the top level menu.

The operation and functionality of this machine can be limited only to authorized 

personnel by the simple introduction of a 4-9 digit PIN (Personal Identification 

Number). This is known as Access Control. The greater the number of digits in the 

PIN, the more secure it is.

>

Access Control Enable/Disable is switched in Menu >Admin Setup>System 

Setup>Access Control.

>

With Access Control set to Enable, the display reverts to the System Setup 

screen immediately following the setting change. If one of the functions such as 

Print, Fax Send or PC Scan is running however, the display will only revert to 

the System Setup screen when the task has been completed.

>

With Access Control Enabled, entering a PIN ID is required to enable setting up 

various utilities. 

>

Enter the PIN ID via the Ten Key pad.

>

A valid PIN ID consists of 4 to 9 digits.