NorthStar 951x Betriebsanweisung
Page 134
951/952 Operator’s Manual Rev. B
Chapter 10 - Using Other Special Functions
Six of the alarms are adjustable, as described below, including
the:
the:
•
alarm audio
•
anchor alarm
•
cross-track distance
•
arrive radius
•
DGPS alarm
•
anchor-watch alarm honk
Setting the alarm
audio
The audio beep that alerts you to alarm conditions can be
turned on or off. When ALARM AUDIO
turned on or off. When ALARM AUDIO
is set to ON, the unit
audibly alerts you to any of the alarm conditions that are
turned on at the ALARMS
turned on at the ALARMS
screen (952) or ALARMS & BACK-
LIGHT screen (951).
1. Press the
to select ALARM AUDIO, then
press the
menu key.
2. Press the
to display OFF or ON.
3. To make your selection, press the
key, or
to leave it unchanged.
Setting the anchor
alarm
The anchor-watch feature of the unit sounds an alarm if the
unit detects that the boat has moved a specified distance from
an initial position (usually where you drop anchor).
unit detects that the boat has moved a specified distance from
an initial position (usually where you drop anchor).
1. Press the
menu key at the spot where the
anchor is dropped. A waypoint named ANCR is created at
this location.
this location.
2. Press the
key in response to the question window
prompt.
COMM FAILURE
communications link failure between GPS
receiver and 951/952 main computer board
receiver and 951/952 main computer board
NO, call the factory
Table 6: Alarm types and descriptions (continued)
Type
Description
Auto clear?