Garmin 530w Betriebsanweisung
9 - AUX PAGES
185
Setup 2 Page
Setup 2 Page
SBAS Selection
To enable WAAS operation, in the Setup 2 page
select the SBAS (Space-Based Augmentation System)
item and then select WAAS. If WAAS is disabled,
the unit will not be able to fly vertically guided GPS
approaches (LPV, LNAV/VNAV, or LNAV+V).
item and then select WAAS. If WAAS is disabled,
the unit will not be able to fly vertically guided GPS
approaches (LPV, LNAV/VNAV, or LNAV+V).
If WAAS was previously disabled, it may take sev-
eral minutes to achieve a 3D-Diff fix after re-enabling
WAAS.
WAAS.
1. Select “SBAS Selection” from the Setup 2 Page
and press ENT.
To enable WAAS operation, select the “SBAS
Selection” menu option.
2. The flashing cursor highlights the WAAS status
selection. Turn the small right knob to allow
On/Off selection.
On/Off selection.
To enable WAAS operation, select the “SBAS
Selection” menu option.
3. Turn the small right knob to select “On” or
“Off” and then press ENT. Press the Cursor
knob to exit WAAS selection.
knob to exit WAAS selection.