Garmin 530w Guida Utente

185

Setup 2 Page

Setup 2 Page

To enable WAAS operation, in the Setup 2 page 

select the SBAS (Space-Based Augmentation System) 
item and then select WAAS. If WAAS is disabled, 
the unit will not be able to fly vertically guided GPS 
approaches (LPV, LNAV/VNAV, or LNAV+V). 

If WAAS was previously disabled, it may take sev-

eral minutes to achieve a 3D-Diff fix after re-enabling 
WAAS. 

1.  Select “SBAS Selection” from the Setup 2 Page 

and press ENT. 

2.  The flashing cursor highlights the WAAS status 

selection. Turn the small right knob to allow 
On/Off selection. 

3.   Turn the small right knob to select “On” or 

“Off” and then press ENT. Press the Cursor 
knob to exit WAAS selection.