Fortinet fortigate-200a Betriebsanweisung

The FortiGate SNMP agent supports FortiGate proprietary MIBs as well as standard 
RFC 1213 and RFC 2665 MIBs. RFC support includes support for the parts of RFC 
2665 (Ethernet-like MIB) and the parts of RFC 1213 (MIB II) that apply to FortiGate 
unit configuration. 

The FortiGate MIBs are listed in 

. You can obtain these MIB files from Fortinet 

technical support. To be able to communicate with the SNMP agent, you must compile 
all of these MIBs into your SNMP manager.

Your SNMP manager might already include standard and private MIBs in a compiled 
database that is ready to use. You must add the Fortinet proprietary MIBs to this 
database. If the standard MIBs used by the Fortinet SNMP agent are already 
compiled into your SNMP manager you do not have to compile them again.

The FortiGate agent can send traps to SNMP managers that you have added to 
SNMP communities. For SNMP managers to receive traps, you must load and 
compile the Fortinet trap MIB (file name fortinet.trap.2.80.mib) onto the SNMP 
manager.

All traps include the trap message as well as the FortiGate unit serial number. 

The Fortinet MIB is a proprietary MIB that includes detailed FortiGate 

system configuration information. Add this MIB to your SNMP 

manager to monitor all FortiGate configuration settings. For more 

information about FortiGate MIB fields, see 

.

fortinet.trap.2.80.mib The Fortinet trap MIB is a proprietary MIB that is required for your 

SNMP manager to receive traps from the FortiGate SNMP agent. For 

more information about FortiGate traps, see 

.

The FortiGate SNMP agent supports MIB II groups with the following 

exceptions.
No support for the EGP group from MIB II (RFC 1213, section 3.11 

and 6.10).
Protocol statistics returned for MIB II groups (IP/ICMP/TCP/UDP/etc.) 

do not accurately capture all FortiGate traffic activity. More accurate 

information can be obtained from the information reported by the 

Fortinet MIB.

The FortiGate SNMP agent supports Ethernet-like MIB information 

with the following exception.
No support for the dot3Tests and dot3Errors groups.