Fortinet fortigate-200a Betriebsanweisung

Enter the firmware image file name and press Enter.
The TFTP server uploads the firmware image file to the FortiGate unit and messages 
similar to the following appear.
• FortiGate unit running v2.x BIOS

Do You Want To Save The Image? [Y/n]
Type N.

• FortiGate unit running v3.x BIOS

Save as Default firmware/Run image without saving:[D/R]
or
Save as Default firmware/Backup firmware/Run image without 
saving:[D/B/R]

Type R.

The FortiGate image is installed to system memory and the FortiGate unit starts 
running the new firmware image but with its current configuration. 

You can log into the CLI or the web-based manager using any administrative account.

To confirm that the new firmware image has been loaded, from the CLI enter:
get system status
You can test the new firmware image as required.

If the FortiGate unit is running BIOS version v3.x, you can install a backup firmware 
image. Once the backup firmware image is installed you can switch to this backup 
image when required.

•

•

•

To run this procedure you:

• access the CLI by connecting to the FortiGate console port using a null-modem 

cable,

• install a TFTP server that you can connect to from the FortiGate as described in 

the procedure 

.

Connect to the CLI using the null-modem cable and FortiGate console port.

Make sure that the TFTP server is running.

Copy the new firmware image file to the root directory of your TFTP server.