Fortinet fortigate-5001a Hardwarehandbuch
FortiGate-5000 Series Hardware Guide
60
01-00000-0293-20060315
Front panel LEDs and connectors
FortiGate-5001FA2 security system
Front panel LEDs and connectors
From the FortiGate-5001FA2 font panel you can view the status of the module
LEDs to verify that the module is functioning normally. You also connect the
FortiGate-5001FA2 module to your network through the front panel ethernet
connections. The front panel also includes the RS-232 console port for connecting
to the FortiOS CLI and a USB port.
LEDs to verify that the module is functioning normally. You also connect the
FortiGate-5001FA2 module to your network through the front panel ethernet
connections. The front panel also includes the RS-232 console port for connecting
to the FortiOS CLI and a USB port.
Figure 31: FortiGate-5001FA2 front panel
LEDs
lists and describes the FortiGate-5001FA2 module LEDs.
PWR ACC
STA IPM
CONSOLE
USB
3
4
1
2
5
6
7
8
3 4 SPF Gigabit
Fiber or Copper
1 2 SPF Gigabit
Fiber or Copper
Accelerated
5 6 7 8
Gigabit Copper
Extraction
Lever
Status
Module
Position
Power
USB
Flash Disk
Access
RS-232
Serial
Extraction
Lever
Mounting
Knot
Mounting
Knot
Link/Traffic
Table 8: FortiGate-5001FA2 module LEDs
LED
State
Description
PWR
Green
The FortiGate-50012FA2 module is powered on.
ACC
Off or
Flashing
red
Flashing
red
The ACC LED flashes red when the FortiGate-5001FA2
module access the FortiOS flash disk. The FortiOS flash disk
stores the current FortiOS firmware build and configuration
files. The system accesses the flash disk when starting up,
during a firmware upgrade, or when an administrator is using
the CLI or GUI to change the FortiOS configuration. Under
normal operating conditions this LED flashes occasionally, but
is mostly off.
module access the FortiOS flash disk. The FortiOS flash disk
stores the current FortiOS firmware build and configuration
files. The system accesses the flash disk when starting up,
during a firmware upgrade, or when an administrator is using
the CLI or GUI to change the FortiOS configuration. Under
normal operating conditions this LED flashes occasionally, but
is mostly off.
STA
Green
Normal operation.
Red
The FortiGate-5001FA2 is booting or a fault condition exists.
IPM
Blue
The FortiGate-5001FA2 is ready to be hot-swapped (removed
from the chassis). If the IPM light is blue and no other LEDs
are lit the FortiGate-5001FA2 module has lost power, possibly
because of a loose or incorrectly aligned left extraction lever.
See
from the chassis). If the IPM light is blue and no other LEDs
are lit the FortiGate-5001FA2 module has lost power, possibly
because of a loose or incorrectly aligned left extraction lever.
See
for more information.
Flashing
Blue
Blue
The FortiGate-5001FA2 is changing from hot swap to running
mode or from running mode to hot swap.
mode or from running mode to hot swap.
Off
Normal operation. The FortiGate-5001FA2 module is in
contact with the chassis backplane.
contact with the chassis backplane.
1, 2, 3, 4
Green
The correct cable is connected to the gigabit SPF interface.
Flashing
Network activity at the gigabit SPF interface.