Fortinet fortigate-5001a Hardwarehandbuch
FortiGate-5002FB2 security system
Inserting a FortiGate-5002FB2 module into a chassis
FortiGate-5000 Series Hardware Guide
01-00000-0293-20060315
01-00000-0293-20060315
77
Inserting a FortiGate-5002FB2 module into a chassis
The following procedure describes how to correctly use the FortiGate-5002FB2
mounting components shown in
mounting components shown in
to insert a FortiGate-5002FB2 module
into a FortiGate-5000 series chassis slot.
The FortiGate-5002FB2 module left extraction lever contacts to a hidden power
switch. The module must be fully installed in a chassis slot and this extraction
lever must be closed and locked for the FortiGate-5002FB2 module to receive
power and operate normally. If the FortiGate-5002FB2 module is not receiving
power, the IPM LED glows blue and all other LEDs remain off.
switch. The module must be fully installed in a chassis slot and this extraction
lever must be closed and locked for the FortiGate-5002FB2 module to receive
power and operate normally. If the FortiGate-5002FB2 module is not receiving
power, the IPM LED glows blue and all other LEDs remain off.
Figure 38: FortiGate-5002FB2 module mounting components
Before inserting the FortiGate-5002FB2 module in a chassis
Before installing the FortiGate-5002FB2 module in a chassis you must have
installed RAM DIMMs. See
installed RAM DIMMs. See
.
Insertion procedure
FortiGate-5002FB2 modules are hot swappable. The procedure for inserting the
FortiGate-5002FB2 module into a FortiGate-5000 series chassis slot is the same
whether or not the FortiGate-5000 series chassis is powered on or not.
FortiGate-5002FB2 module into a FortiGate-5000 series chassis slot is the same
whether or not the FortiGate-5000 series chassis is powered on or not.
Closed
Open
Alignment Pin
Alignment Pin
Mounting
Knot
Mounting
Knot
Extraction
Lever
Extraction
Lever
Extraction Lever
Lock
Extraction Lever
Lock
Switch
Contact
Power
Switch