Fortinet fortigate-300 Installationsanweisungen
FortiGate-300 Installation Guide Version 2.80 MR4
FortiGate-300 Installation Guide
01-28004-0021-20040830
47
High availability installation
This chapter describes how to install two or more FortiGate units in an HA cluster. HA
installation involves three basic steps:
installation involves three basic steps:
•
•
•
For information about HA, see the FortiGate Administration Guide and the FortiOS
High Availability technical note.
High Availability technical note.
Priorities of heartbeat device and monitor priorities
The procedures in this chapter do not include steps for changing the priorities of
heartbeat devices or for configuring monitor priorities settings. Both of these HA
settings should be configured after the cluster is up and running.
heartbeat devices or for configuring monitor priorities settings. Both of these HA
settings should be configured after the cluster is up and running.
Configuring FortiGate units for HA operation
A FortiGate HA cluster consists of two or more FortiGate units with the same HA
configuration. This section describes how to configure each of the FortiGate units to
be added to a cluster for HA operation. The procedures are the same for active-active
and active-passive HA.
configuration. This section describes how to configure each of the FortiGate units to
be added to a cluster for HA operation. The procedures are the same for active-active
and active-passive HA.
•
•
•
High availability configuration settings
Use the following table to select the HA configuration settings for the FortiGate units in
the HA cluster.
the HA cluster.