Fortinet fortigate-50r Installationsanweisungen
226
Fortinet Inc.
Configuring alert email
Logging and reporting
4
Select OK.
The traffic filter list displays the new traffic address entry with the settings that you
selected in
The traffic filter list displays the new traffic address entry with the settings that you
selected in
.
Figure 45: Example new traffic address entry
Configuring alert email
You can configure the FortiGate unit to send alert email to up to three email addresses
when there are virus incidents, block incidents, network intrusions, and other firewall
or VPN events or violations. After you set up the email addresses, you can test the
settings by sending test email.
when there are virus incidents, block incidents, network intrusions, and other firewall
or VPN events or violations. After you set up the email addresses, you can test the
settings by sending test email.
•
•
•
Adding alert email addresses
Because the FortiGate unit uses the SMTP server name to connect to the mail server,
it must be able to look up this name on your DNS server. Therefore, before configuring
alert email ensure that you have configured at least one DNS server.
it must be able to look up this name on your DNS server. Therefore, before configuring
alert email ensure that you have configured at least one DNS server.
To add a DNS server
1
Go to System > Network > DNS.
2
If they have not already been added, add the primary and secondary DNS server
addresses provided to you by your ISP.
addresses provided to you by your ISP.
3
Select Apply.
Destination IP Address
Destination Netmask
Destination Netmask
Type the destination IP address and netmask for which you want the
FortiGate unit to log traffic messages. The address can be an
individual computer, subnetwork, or network.
Service
Select the service group or individual service for which you want the
FortiGate unit to log traffic messages.