Planar C3 Betriebsanweisung
ONE: Checking the Package Contents
The components for the review cart ship in two boxes. Confirm that you have received these items.
Box 1: Preconfigured cart, containing:
– Video and power cables (2 each),
routed
– Power supplies (2), mounted,
as required per display
– Keyboard and mouse
– Keyboard cover
– Mounting brackets with VESA
– Keyboard cover
– Mounting brackets with VESA
100-mm hole pattern, attached
– Power strip (4 outlets), mounted
and routed
– Computer straps (2)
– Cable ties (5)
– Cable ties (5)
Box 2: Dual Dome CX, EX, PX, or QX or single Dome E4c display unit, including:
– Screws, Phillips buttonhead (8)
– Display controller
– Driver software
– Display documentation
– Dome CXtra software
– Display controller
– Driver software
– Display documentation
– Dome CXtra software
TWO: Installing the Display Controller
Install the display controller into your computer before you attach the computer to the cart. Refer to the display
documentation for instructions.
documentation for instructions.
THREE: Mounting the Computer
Be sure to center the computer unit on the L-bracket for stability. To use a UPS on the cart, position the device on the shelf at
the bottom of the cart, as shown in step 3. Use a 3" x 5" pad of hook & loop tape on the bottom of the UPS. Secure the UPS
to the shelf with long cable ties routed around the UPS and through the four slits on the bracket.
the bottom of the cart, as shown in step 3. Use a 3" x 5" pad of hook & loop tape on the bottom of the UPS. Secure the UPS
to the shelf with long cable ties routed around the UPS and through the four slits on the bracket.
Position the cart so that you face
the rear. Lock the front wheels.
Remove the cables bundled on
the L-bracket and unfasten the straps.
Place the computer on the
L-bracket and secure the straps.
FOUR: Mounting Dual Displays
Mounting dual displays to the cart is a two-person task. Ask someone to hold each display in place, while you secure it to
the mounting bracket. See page 3 for mounting of the Dome E4c display.
the mounting bracket. See page 3 for mounting of the Dome E4c display.
Attach the first display to
a mounting bracket and secure
the two top screws.
the two top screws.
Rotate the display to landscape
mode to secure the two bottom
screws. Repeat steps 1 and 2 for
the second display.
screws. Repeat steps 1 and 2 for
the second display.
Slide the mounting brackets
toward the center so that the dual
displays are side by side.
displays are side by side.
1
2
3
1
2
3