Planar C3 User Guide

 

The components for the review cart ship in two boxes.  Confirm that you have received these items.

Box 1: Preconfigured cart, containing:

– Video and power cables (2 each), 

routed

– Power supplies (2), mounted, 

as required per display 

– Keyboard and mouse
– Keyboard cover
– Mounting brackets with VESA 

100-mm hole pattern, attached

– Power strip (4 outlets), mounted 

and routed

– Computer straps (2)
– Cable  ties  (5)

Box 2: Dual Dome CX, EX, PX, or QX or single Dome E4c display unit, including:

– Screws, Phillips buttonhead (8)
– Display  controller
– Driver software
– Display documentation
– Dome  CXtra  software

Install the display controller into your computer before you attach the computer to the cart.  Refer to the display 
documentation for instructions. 

Be sure to center the computer unit on the L-bracket for stability.  To use a UPS on the cart, position the device on the shelf at 
the bottom of the cart, as shown in step 3.  Use a 3" x 5" pad of hook & loop tape on the bottom of the UPS.  Secure the UPS 
to the shelf with long cable ties routed around the UPS and through the four slits on the bracket. 

Position the cart so that you face 

the rear. Lock the front wheels. 

Remove the cables bundled on 

the L-bracket and unfasten the straps. 

Place the computer on the 

L-bracket and secure the straps. 

Mounting dual displays to the cart is a two-person task.  Ask someone to hold each display in place, while you secure it to 
the mounting bracket.  See page 3 for mounting of the Dome E4c display.

Attach the first display to 

a mounting bracket and secure 
the two top screws. 

Rotate the display to landscape 

mode to secure the two bottom 
screws.  Repeat steps 1 and 2 for 
the second display.

Slide the mounting brackets 

toward the center so that the dual 
displays are side by side.