Aethra d2001 nx Benutzerhandbuch
USER’S MANUAL
ISDN TESTER AND ANALYZER D2001
NX
3.2. Selecting a manual test
To select a manual test:
1
Open the TEST MENU.
The last used setup appears on the screen.
The last used setup appears on the screen.
2
Select the ACCESS field
3
Select the access type e.g. ISDN BASIC or POTS
4
Select the ACT AS field
5
Select the instrument mode, e.g. NT-U
The lower section of the screen shows the the selected
network configuration. The available instrument modes
are shown in Table 1-1
network configuration. The available instrument modes
are shown in Table 1-1
6
Select MANUAL TESTS, the following screen appears
7
Choose the test that you want to perform.
8
Once configured all the parameters regarding the test
chosen, select °Use this setup for testing°.
chosen, select °Use this setup for testing°.
Each test is described in the following pages.
CHAPTER 3 - PERFORMING A MANUAL TEST
33