Dwin hd-50 Betriebsanweisung
Page 6 of 20
predefined video sources, the Processor allows the user to create up to three new video source
memory locations per video input.
Settings for each input video signal can then be adjusted and stored separately in the system's
memory. These settings are automatically recalled for each input and video type when selected.
For more details on how to create memory location for new video sources refer to ”New Video Source”
and “Image Setup” Menus.
Two programmable +12 Volt DC outputs are also provided to trigger a relay activated electronic device.
memory locations per video input.
Settings for each input video signal can then be adjusted and stored separately in the system's
memory. These settings are automatically recalled for each input and video type when selected.
For more details on how to create memory location for new video sources refer to ”New Video Source”
and “Image Setup” Menus.
Two programmable +12 Volt DC outputs are also provided to trigger a relay activated electronic device.
Connections
1. DVI/HDCP Output to Display
DVI-D
2. DVI/HDCP Inputs
(DVI 1, DVI 2)
DVI-D
3. Switched +12VDC Outputs (RY1, RY2)
2.5mm DC Plug
4. RGBS Computer/HDTV Inputs
D-sub 15 pin Socket
5. RS-232 Computer Input
D-sub 9 pin Socket
6. S-Video Inputs
( S1, S2 )
4 pin Mini-Din
7. Composite Video Inputs
( V1, V2 )
RCA Type
8. Component Video Inputs (Y1, R1, B1)
RCA Type
(Y2, R2, B2)
RCA Type
9. AC Power Receptacle
3 Prong Receptacle
1. DIGITAL OUTPUT
Note: The Plasma Display will not power up without the DVI cable connected to the both
Note: The Plasma Display will not power up without the DVI cable connected to the both
components!
Connect this output to the Digital input of the Plasma Display via high quality DVI-D cable.
The standard rectangular DVI connector is fairly large in size (approximately 2" wide) making it difficult
to run through the walls. DWIN's solution is to terminate one end of the DVI cable with a .75" circular
connector that can easily run through a 1" conduit. DWIN offers these proprietary (DVI-D-xx) cables in
6 different lengths: 25, 30, 35, 40, 45, and 50 feet. Part numbers for these cables are DVI-D-xx, the
“xx” refers to the length of the cable.
The standard rectangular DVI connector is fairly large in size (approximately 2" wide) making it difficult
to run through the walls. DWIN's solution is to terminate one end of the DVI cable with a .75" circular
connector that can easily run through a 1" conduit. DWIN offers these proprietary (DVI-D-xx) cables in
6 different lengths: 25, 30, 35, 40, 45, and 50 feet. Part numbers for these cables are DVI-D-xx, the
“xx” refers to the length of the cable.
To convert from Circular connector back to DVI-D connector, DWIN offers 2 foot Circular to DVI-D
Adapter. The part number for this adapter-cable is DVI-C-2.
Adapter. The part number for this adapter-cable is DVI-C-2.
1
2
3
4
5
6
8
9
7