Dwin hd-50 Betriebsanweisung
Page 7 of 20
DVI cable with Circular Connector
2. DVI-D INPUTS
The DVI 1 and DVI 2 inputs are HDCP compliant for High-Definition (480p, 580p, 720p, 1080i) sources
and computer graphics with VGA, SVGA, XGA, and WXGA resolutions. For computer graphics with
VGA, SVGA, XGA, or WXGA it is recommended to set the computer to 60 Hz vertical frequency.
To display a computer graphics connect the DVI output from the graphics card to the DVI 1 or DVI 2
and computer graphics with VGA, SVGA, XGA, and WXGA resolutions. For computer graphics with
VGA, SVGA, XGA, or WXGA it is recommended to set the computer to 60 Hz vertical frequency.
To display a computer graphics connect the DVI output from the graphics card to the DVI 1 or DVI 2
inputs of the Digital Processor, select the corresponding DVI input by pressing “9” or “0” on the remote
control and than activate the DVI output from the computer by using computer’s display set-up menu.
control and than activate the DVI output from the computer by using computer’s display set-up menu.
The following are the pin assignments for the DVI-D connectors:
Pin No.
Signal Name
Pin No.
Signal Name
Pin No.
Signal Name
1
Data 2-
10
Data 1+
18
Data 0+
2
Data 2+
11
Data 1 / Shield
19
Data 0 / Shield
3
Data 2 / Shield
14
+5V Power
22
Clock Shield
6
DDC Clock
15
Ground
23
Clock+
7
DDC Data
16
Hot Plug Detect
24
Clock-
9
Data 1-
17
Data 0-
3. SWITCHED +12VDC OUTPUTS
The PlasmaImage
™
Processor has two switched +12 VDC outlets labeled as RY1 and RY2. These
outlets may be used to trigger a relay in an electric device. See Relay Setup menu for more details.
4. RGBS INPUTS
4. RGBS INPUTS
The RGBS1 and RGBS2 inputs (D-sub 15) are provided for High-Definition (480p, 580p, 720p, 1080i)
sources and computer graphics with VGA, SVGA, XGA, and WXGA resolution. For computer graphics
sources and computer graphics with VGA, SVGA, XGA, and WXGA resolution. For computer graphics
with VGA, SVGA, XGA, or WXGA it is recommended to set the computer to 60 Hz vertical frequency.
The following are the pin assignments for the D-sub 15 pin connector:
Pin No.
Signal Name
Pin No.
Signal Name
Pin No.
Signal Name
1
Red
6
Ground
11
2
Green
7
Ground
12
3
Blue
8
Ground
13
Horz. SYNC
4
9
Ground
14
Vert. SYNC
5
10
15
5. RS-232 COMPUTER INPUT
The RS-232C serial interface is provided for external control of the PlasmaImage
™
from a central
controller, such as a Home Theater control computer, Smart Home automation system, etc.