Dwin hd-700 Installationsanweisungen

- 9 -

Before initial adjustments are made to the unit, locate the correct distance from the
screen. This distance should be obtained by using the HD-700 Projector installation
software. Make certain that the front rubber feet are set so that the unit is level and
parallel to the floor. You may wish to verify this with a standard carpenter’s level.

In order to make certain adjustments, it is necessary to remove the front portion of the
unit’s top cover.

Remove the front portion of the top cover by loosening the two screws on either side of
the green lens and loosening the two screws on the top of  the  projector.  It  is  not
necessary to completely remove the screws. While holding the cover, pull it upward to
remove it from the unit.