Dwin hd-700 Installationsanweisungen

- 10 -

The HD-700 has no on board user controls. All operation is controlled through the wireless remote control or  the
optional RS-232C link to a computer or control system.

The remote control supplied with the unit is factory programmed to operate the HD-700 when “TV” mode 
selected.

SL-8000 remote furnished with the HD-700 is a universal  remote  control  capable  of  controlling  8  different
devices. The operational instructions on this page refer to the remote buttons used with the  HD-700  only.
Consult the SL-8000 operating manual for complete information on programming the remote and using it with
other devices.

1.  Press “TV” or “POWER” buttons to turn the HD-700 ON.

2.  To turn the HD-700 OFF press the “POWER” button.

3.  Press “MENU” button to view the  Main Control Menu  at

any time. Pressing the  “MENU” button while a sub  menu
is displayed on the screen will return back to the  Main
Menu. Pressing the “MENU” button while the Main  Menu
is displayed will cancel the menus.

4.    Press  “GUIDE”  button  to  display  the  list  of  sources

entered into the HD-700’s memory. To select one of  the
sources press the  numeric buttons corresponding to  the
desired source. The HD-700’s memory stores any set  of
presets relating to scan frequencies and/or aspect  ratios
as  a  “source”.  This  means  that  the  same  physical
source,  such  as  a  single  line  doubler,  may  have
numerous sources for  different  aspect  ratios  or  screen
sizes.

5.  Press “EXIT” to exit the menu and to clear the screen.

6.   When converging the HD-700, press  “SEL”  button  to

toggle between cursor movement (a solid block cursor  will
be shown) and the adjustment mode (an outline  cursor
will be shown).

7. CURSOR/MOVEMENT CONTROLS  / / / :
    These buttons are used to move the cursor on the  screen

or  to  control  the  left/right  and  up/down  movement  of
screen adjustments.

8.  NUMERIC  BUTTONS:  Use  these  buttons  to  select 

specific function listed on a menu.