Vinotemp wm-125c Betriebsanweisung
VINOTEMP
INTERNATIONAL
17631 SOUTH SUSANA ROAD
RANCHO DOMINGUEZ,CA 90221
(800)777.8466 FAX (310)886-3310
WINEMATE COOLING SYSTEMS
DIGITAL DISPLAY INSTRUCTIONS
WARNING:
PLEASE DO NOT PLAY WITH THE DIGITAL DISPLAY
DO NOT PRESS ANY BUTTON FOR MORE THAN 60 SECONDS, IT WILL SHUT DOWN THE
UNIT OR GO INTO SLEEP MODE.
1
The green LED indicates the
compressor is on and running
compressor is on and running
2
Alarm signal: Indicates the alarm is on
3
Defrost in progress:LED will light when
unit is in defrost mode
unit is in defrost mode
4
Digital Display:LED will display the
tempature .
Codes will display on when pressed
tempature .
Codes will display on when pressed
5
LED button is to modify the tempatures
or activates/deactivates continuous cycle
Moves from one parameter to the next
Increases the value of the parameter
or activates/deactivates continuous cycle
Moves from one parameter to the next
Increases the value of the parameter
6
Set Point:
Silence the alarm
You will access the menu (if pressed for more than five seconds)
Blinking indicates that controller is waiting for a time delay to expired
Silence the alarm
You will access the menu (if pressed for more than five seconds)
Blinking indicates that controller is waiting for a time delay to expired
7
LED button is to modify the tempatures
Moves from one parameter to the next
Decreases the value of the parameter
Moves from one parameter to the next
Decreases the value of the parameter
DURING NORMAL WORKING CONDITIONS,THE DISPLAY SHOWS THE VALUE MEASURED
BY THE AIR.IN CASEOF AN ACTIVE ALARM, THE TEMPERATURE FLASHES
ALTERNATELY TO THE CODE.
BY THE AIR.IN CASEOF AN ACTIVE ALARM, THE TEMPERATURE FLASHES
ALTERNATELY TO THE CODE.
PAGE 1