Vivitar 3500 Benutzerhandbuch
13
5. After releasing shutter, the Self-Timer mode will be canceled.
* If you want to cancel the self-timer once it started, press the /+
button again or Power button.
* The self-timer can work together with Auto, Flash On or Flash Off
mode.
button again or Power button.
* The self-timer can work together with Auto, Flash On or Flash Off
mode.
Playback stored images
(Fig.9)
1. Slide the MODE switch to "PLAY" position, the camera displays an
image stored on the CompactFlash card.
image stored on the CompactFlash card.
2. Press /+ button to see the next image and /- button to see the
previous one.
3. Pressing and holding ( /+ or /- ) for over 2 seconds will
forward (backward) the displayed image every 2 seconds
automatically. Press this button again to stop.
4. If no images stored on the CompactFlash card, the message "NO
IMAGE" is displayed.
* Until the card is replaced, the camera memorizes the last play-backed
image at the power off and displays the same image at the next
power on. If any images are captured in the Recording mode, the
latest captured image is displayed.
* Only the images that recognized by the camera can be displayed.
The Picture number displayed on the LCD is the number currently
assigned to. It may be moved over after erasing some images.
automatically. Press this button again to stop.
4. If no images stored on the CompactFlash card, the message "NO
IMAGE" is displayed.
* Until the card is replaced, the camera memorizes the last play-backed
image at the power off and displays the same image at the next
power on. If any images are captured in the Recording mode, the
latest captured image is displayed.
* Only the images that recognized by the camera can be displayed.
The Picture number displayed on the LCD is the number currently
assigned to. It may be moved over after erasing some images.
Display Images on a TV Screen
Use the equipped video cable to connect the camera to a television,
you can view the images on the TV screen.
1. Connect your camera and a TV from "VIDEO OUT" terminal of the
camera into only to "VIDEO IN" terminal of the TV.(Fig.10)
2. Switch "Input Source" of the TV to "Video In" accordingly.
3. Make sure that the power of both the camera and the TV are
powered on, then you can see the image on TV.
* Use only a TV equipped with "VIDEO INPUT" function.
you can view the images on the TV screen.
1. Connect your camera and a TV from "VIDEO OUT" terminal of the
camera into only to "VIDEO IN" terminal of the TV.(Fig.10)
2. Switch "Input Source" of the TV to "Video In" accordingly.
3. Make sure that the power of both the camera and the TV are
powered on, then you can see the image on TV.
* Use only a TV equipped with "VIDEO INPUT" function.