Vivitar 3500 Benutzerhandbuch

14

Y ou can download stored images to your personal computer (PC)

through the RS-232C/USB digital connector from proprietary software.
The camera can receive the image data from a PC through the
software, too. Separate cable is required for RS-232 or USB (optional)
connection. You can find the accessories in your Connection Kit.

1.  Turn off the power of the camera and the personal computer.
2. Plug one end of the serial cable into the COM port (or USB

     accordingly) of your computer.

3. Lift the Connector Cover of the camera.
4. Plug the other end of the serial cable into the camera's DIGIT AL

     port.

5.  Turn on the camera and personal computer, and execute the

     specific software. You are now ready to transfer the images.

The following is the required system configuration:
IBM PC or 100% compatible, with a Pentium 60 MHz or higher CPU

At least 16 MB of available memory and 24 MB of available hard disk
space
VGA/SVGA color display system, 640 x 480 resolution or higher, 256
color or higher 3.5" diskette drive to install this TWAIN Driver
CD-ROM drive to install the bundled graphics software

For faster processing and to display colors more accurately, we rec-
ommend the following system configuration:

Pentium 200 MMX CPU
32 MB or more of RAM
SVGA  color display system, 16 million colors

Microsoft W indows 95 or 98 environment.
Application Software must be compatible with  TWAIN protocol.

System Requirements for MACINT OSH
    System 7.5 or later
    Power MAC
    32 M RAM or above