Canon mp610 Benutzerhandbuch

Routine Maintenance

Remove the ink tank whose lamp is flashing 
fast.

(1) Push the tab and remove the ink tank.

Prepare the replacement tank.

(1) Remove the new ink tank from its packaging.
(2) Pull the orange tape (B) in the direction of the 

arrow to peel off the protective film.

(3) Remove the film (C) completely.

(4) Remove the orange protective cap from the 

bottom of the ink tank.
Discard the cap once it is removed.

z

Handle ink tanks carefully to avoid staining clothing 

or the surrounding area.

z

Discard empty ink tanks according to the local laws 

and regulations regarding disposal of consumables.

z

Do not remove more than one ink tank at a time. Be 

sure to replace ink tanks one by one when 

replacing more than one ink tank.

z

For details on ink lamp flashing speeds, see 

“Getting the Ink Status Information” on page 46.

Make sure that the protective film does not remain on 

the air hole (D). If the air hole is blocked with the 

remaining film, ink may leak out or may not eject 

properly.

z

Do not touch the electrical contacts (F) on the ink 

tank. Doing so can cause the machine to 

malfunction or become unable to print.

z

Be sure to remove the clear film from the ink tank in 

the exact order shown above, as failure to follow 

this step may cause the ink to leak and stain your 

clothes and hands.

z

Do not squeeze the side of ink tanks as this may 

cause the ink to leak out and stain your clothes and 

hands.

z

Do not reattach the protective cap once you have 

removed it. Discard it according to the local laws 

and regulations regarding disposal of consumables.

z

Do not touch the open ink port once the protective 

cap is removed, as this may prevent the ink from 

being ejected properly.

z

Be careful not to stain your clothes and hands with 

ink on the removed protective cap.

(A)

(A) Do NOT touch the Print Head Lock 
Lever; remove only the ink tank.

(D)

(B)

(C)

(E)

(F)

(E) Carefully hold the protective cap 
when removing it to prevent the ink from 
staining your fingers.