Canon mp610 Benutzerhandbuch

Routine Maintenance

Install the ink tank.

(1) Insert the front end of the ink tank into the Print 

Head.
(G) Make sure the position of the tank matches 
the label.

(2) Press on the 

 mark on the ink tank until the 

ink tank snaps firmly into place.

(3) Make sure that the ink lamp lights up red.

Close the Inner Cover.

Gently close the Scanning Unit (Printer Cover).

Install all the ink tanks to print. The machine cannot be 

used unless all the ink tanks are installed.

Make sure that the Inner Cover is closed. Printing will 

not start with the Inner Cover open since paper cannot 

be fed properly.

z

Be sure to hold the Scanning Unit (Printer Cover) firmly using both hands, and be careful not to 

get your fingers caught.

z

Do not hold the LCD or the Operation Panel.

z

If the error message is still displayed after the Scanning Unit (Printer Cover) is closed, see “An 

Error Message Is Displayed on the LCD” on page 70.

z

When you start printing after replacing the ink tank, Print Head Cleaning is performed 

automatically. Do not start another operation until the machine has stopped making operating 

noises.

(G)

(1)

(2)

(3)