Canon i560 Anleitung Für Quick Setup
Troubleshooting
55
Cannot Print Properly from the Digital Camera
The following messages may be displayed on the digital camera or digital video camcorder
when images are printed directly from them. Correct the error according to the procedure
below.
when images are printed directly from them. Correct the error according to the procedure
below.
Camera Error Message
Possible Cause
Try This
Printer in use
Images are printed from the
computer.
computer.
Wait until printing ends. The printer automatically starts
printing the images from the camera after completing the
current printing.
printing the images from the camera after completing the
current printing.
Printer warming up
The printer is warming up.
Wait until warm-up ends. When it is ready, the printer starts
printing automatically.
printing automatically.
No Paper
No paper is loaded.
Load the paper in the printer and press the RESUME/CANCEL
button on the printer.
button on the printer.
Paper Jam
A paper jam occurrs in the
printer.
printer.
Remove the jammed paper, load new media, and press the
RESUME/CANCEL button.
RESUME/CANCEL button.
Printer cover open
The front cover is open.
Close the front cover.
No print head
No print head is installed.
(The POWER lamp on the
printer flashes five times.)
(The POWER lamp on the
printer flashes five times.)
Install a print head according to the
Easy Setup Instructions.
The print head is defective.
(The POWER lamp on the
printer flashes five times.)
(The POWER lamp on the
printer flashes five times.)
Contact the Customer Care Center.
Waste tank full
The waste ink tank is nearly
full.
full.
Press the RESUME/CANCEL button on the printer to recover
from the error. Contact the Customer Care Center as soon as
possible.
from the error. Contact the Customer Care Center as soon as
possible.
Paper lever error
Incorrect position of the paper
thickness lever.
thickness lever.
Open the front cover and adjust the paper thickness lever to the
left position.
left position.
Printer error
An error requiring servicing
has occured. (The POWER
lamp on the printer flashes
alternately orange and green.)
has occured. (The POWER
lamp on the printer flashes
alternately orange and green.)
Turn off the printer, unplug the power cord from the power
supply, plug the power cord back in, and then turn on the
printer. If the same error occurs, contact the Customer Care
Center.
supply, plug the power cord back in, and then turn on the
printer. If the same error occurs, contact the Customer Care
Center.
Note
z Images can be printed directly from Canon “Bubble Jet Direct” compatible
digital cameras and digital video camcorders connected to this printer.
z If the connected digital camera or digital video camcorder does not support
“Bubble Jet Direct”, the POWER lamp on the printer flashes eleven times. If
this happens, disconnect the connection cable and press the RESUME/
CANCEL button.
this happens, disconnect the connection cable and press the RESUME/
CANCEL button.
z If the operation time or data transmission time is too long when the digital
camera or digital video camcorder is connected to this printer, a
communication time error may occur and no more images can be printed. If
this error occurs, press the RESUME/CANCEL button. They will automatically
turn on. If not, turn it on.
communication time error may occur and no more images can be printed. If
this error occurs, press the RESUME/CANCEL button. They will automatically
turn on. If not, turn it on.
z For more details, also refer to the user's manual for the digital camera or
digital video camcorder.
i560_QSG_US.book Page 55 Tuesday, May 6, 2003 1:43 PM