LXE mx7 Verweisanleitung
Software Setup
23
E-EQ-MX7RG-H
MX7 Reference Guide
Set The Audio Speaker Volume
Note:
An application may override the control of the speaker volume. Turning off sounds saves
power and prolongs battery life.
power and prolongs battery life.
Figure 1-18 Speaker Location
The speaker is located on the front of the device above the MX7 logo. The audio volume can be
adjusted to a comfortable level for the listener. The volume is increased or decreased one step
each time the volume key sequence is pressed. The device has an internal speaker and a jack for
an external headset. Operational “beeps” are emitted from the speaker.
adjusted to a comfortable level for the listener. The volume is increased or decreased one step
each time the volume key sequence is pressed. The device has an internal speaker and a jack for
an external headset. Operational “beeps” are emitted from the speaker.
Using the Keypad
Note:
Volume & Sounds (in Control Panel) must be enabled before the following key sequences
will adjust the volume.
will adjust the volume.
To adjust speaker volume:
•
Tap the Orange key then the Scan key to enter Volume change mode.
•
Use the Up Arrow and Down Arrow keys to adjust volume until the speaker volume is
satisfactory.
satisfactory.
•
Press the Enter key to exit this mode.
Using the Touchscreen
Tap the
| Settings | Control Panel | Volume & Sounds | Volume tab.
Figure 1-19 Volume & Sounds Properties
Change the volume setting and tap OK to save the change. You can also select / deselect sounds
for key clicks and screen taps and whether each is loud or soft.
for key clicks and screen taps and whether each is loud or soft.
As the volume scrollbar is moved between Loud and Soft, the computer will emit a tone each time
the volume increases or decreases in decibel range.
the volume increases or decreases in decibel range.