LXE mx7 Verweisanleitung
28
Bluetooth
MX7 Reference Guide
E-EQ-MX7RG-H
Bluetooth
Access:
| Settings | Control Panel | Bluetooth
or Bluetooth icon in taskbar
or
Tap the Bluetooth icon in the taskbar to open the Bluetooth LXEZ Pairings application.
The MX7 default Bluetooth hardware setting is Enabled. Bluetooth is an option and may not be
available on all devices. The MX7 does not have a Bluetooth managed LED.
available on all devices. The MX7 does not have a Bluetooth managed LED.
The LXE MX7 Bluetooth® module is designed to Discover and pair with nearby LXE Bluetooth
devices. Non-LXE Bluetooth devices may be discovered but are inaccessible as they are filtered
out on the Bluetooth Devices panel and are not displayed.
devices. Non-LXE Bluetooth devices may be discovered but are inaccessible as they are filtered
out on the Bluetooth Devices panel and are not displayed.
Prerequisite
The Bluetooth devices (printers and/or scanners) have been setup to allow them
to be “Discovered” and “Connected/Paired”. The SysAdmin is familiar with the
pairing function of the Bluetooth devices.
to be “Discovered” and “Connected/Paired”. The SysAdmin is familiar with the
pairing function of the Bluetooth devices.
Figure 1-22 Bluetooth Devices Display – Before Discovering Devices
The Bluetooth remote device should be as close as possible, and in direct line of sight, with the
MX7 during the pairing process.
MX7 during the pairing process.
Initial Use
1. Select Start | Settings | Control Panel | Bluetooth or tap the Bluetooth icon in the
taskbar.
2. Tap the Settings Tab.
3. Change the Computer Friendly Name at the bottom of the Settings display. The
3. Change the Computer Friendly Name at the bottom of the Settings display. The
Bluetooth MX7 default name is determined by the LXE factory installed software version.
LXE strongly urges assigning every MX7 a unique name (up to 32 characters) before
Bluetooth Discovery is initiated.
LXE strongly urges assigning every MX7 a unique name (up to 32 characters) before
Bluetooth Discovery is initiated.
4. Check or uncheck the Bluetooth options on the Settings tab.
5. Tap the OK button to save your changes or the X button to discard any changes.
5. Tap the OK button to save your changes or the X button to discard any changes.
See Also: Chapter 3 – System Configuration, section titled Bluetooth.