LXE mx7 Verweisanleitung
30
Bluetooth
MX7 Reference Guide
E-EQ-MX7RG-H
Suspend mode, going out of range or being turned off). When disabled, after being enabled, the
MX7 stops searching after 30 minutes. This option draws power from the Main Battery.
MX7 stops searching after 30 minutes. This option draws power from the Main Battery.
Subsequent Use
Note:
Taskbar and Bluetooth device Icon states change as Bluetooth devices are discovered,
pair, connect and disconnect. A taskbar Bluetooth icon with a red background indicates
Bluetooth is active and not paired with any device. A device icon with a red background
indicates a disconnected paired device.
pair, connect and disconnect. A taskbar Bluetooth icon with a red background indicates
Bluetooth is active and not paired with any device. A device icon with a red background
indicates a disconnected paired device.
1. Tap the Bluetooth icon in the taskbar to open the Bluetooth LXEZ Pairing application.
Tap the Bluetooth Devices tab, if necessary.
2. Tap the Discover button. When the Bluetooth module begins searching for in-range
Bluetooth devices, the button name changes to Stop. Tap the Stop button to cancel the
Discover function at any time.
Discover function at any time.
3. The discovered devices are listed in the Bluetooth Devices window.
4. Doubletap a Bluetooth device in the Discovered window to open the Bluetooth device
4. Doubletap a Bluetooth device in the Discovered window to open the Bluetooth device
properties menu.
5. Tap Pair as Scanner to set up the MX7 to receive scanner data.
6. Tap Pair as Printer to set up the MX7 to send data to the printer.
7. If paired, tap Disconnect to stop pairing with the device. Tap Delete to remove the device
6. Tap Pair as Printer to set up the MX7 to send data to the printer.
7. If paired, tap Disconnect to stop pairing with the device. Tap Delete to remove the device
name and data from the MX7 Bluetooth Devices list. Tap OK.
8. Upon successful pairing, the selected device may react to indicate a successful
connection. The reaction may be an audio signal from the device, flashing LED on the
device, or a dialog box is placed on the MX7 display.
device, or a dialog box is placed on the MX7 display.
9. Whenever the MX7 returns from Suspend Mode, all previously paired, live, Bluetooth
devices in the vicinity are paired, one at a time, with the MX7. If the devices cannot
connect to the MX7 before the re-connect timeout time period expires (default is
approximately 20 seconds for each paired device) there is no indication of the continuing
disconnect state if Report Failure to Reconnect is disabled.
connect to the MX7 before the re-connect timeout time period expires (default is
approximately 20 seconds for each paired device) there is no indication of the continuing
disconnect state if Report Failure to Reconnect is disabled.
See Also: Chapter 3 – System Configuration, section titled Bluetooth.