LXE mx7 Verweisanleitung
34
Bluetooth
MX7 Reference Guide
E-EQ-MX7RG-H
LED on Bluetooth Device
Behavior
Yellow LED blinks at 2 Hz
Linking in progress
Off
Disconnected or unlinked
Yellow LED blinks at 50 Hz
Bluetooth transmission in progress
Yellow LED blinks at the same rate
as the paging beep (1 Hz)
as the paging beep (1 Hz)
Paging
Green LED blinks once a second
Disabled indication
Upon startup, if the mobile Bluetooth scanner sounds a long tone, this means the scanner has not
passed its automatic Selftest and has entered isolation mode. If the scanner is reset, the sequence is
repeated. Contact LXE Support for assistance.
passed its automatic Selftest and has entered isolation mode. If the scanner is reset, the sequence is
repeated. Contact LXE Support for assistance.
Bluetooth Printer Setup
The Bluetooth managed device should be as close as possible, in direct line of sight, with the
MX7 during the pairing process.
MX7 during the pairing process.
1. Open the LXEZ Pairing Panel (Start | Settings | Control Panel | Bluetooth).
2. Tap Discover. Locate the Bluetooth printer in the discovery panel.
3. Tap and hold the stylus (or doubletap) on the Bluetooth printer until the right-mouse-click
2. Tap Discover. Locate the Bluetooth printer in the discovery panel.
3. Tap and hold the stylus (or doubletap) on the Bluetooth printer until the right-mouse-click
menu appears.
4. Select Pair as Printer to pair the MX7 with the Bluetooth managed printer.
The devices are paired. The Bluetooth managed printer may respond with a series of beeps or
LED flashes.
LED flashes.
Please refer to the Bluetooth managed printer manufacturer’s User Guide; it may be available on
the manufacturer’s web site. Please contact your LXE representative for Bluetooth product
assistance.
the manufacturer’s web site. Please contact your LXE representative for Bluetooth product
assistance.
Note:
If there is no beep or no LED flash from the Bluetooth managed printer, the MX7 and the
printer are currently paired.
printer are currently paired.