LXE mx7 Verweisanleitung
32
Bluetooth
MX7 Reference Guide
E-EQ-MX7RG-H
Bluetooth Barcode Reader Setup
Please refer to the Bluetooth scanner manufacturer’s User Guide; it may be available on the
manufacturer’s web site. Contact your LXE representative for Bluetooth product assistance.
manufacturer’s web site. Contact your LXE representative for Bluetooth product assistance.
Introduction
LXE supports several different types of barcode readers. This section describes the interaction and
setup for a mobile Bluetooth laser scanner or laser imager connected to the MX7 using Bluetooth
functions.
setup for a mobile Bluetooth laser scanner or laser imager connected to the MX7 using Bluetooth
functions.
•
The MX7 must have the Bluetooth hardware and software installed. An MX7 operating
system upgrade may be required. Contact your LXE representative for details.
system upgrade may be required. Contact your LXE representative for details.
•
If the MX7 has a Bluetooth address identifier barcode label affixed, then Bluetooth
hardware and software is installed.
hardware and software is installed.
•
The mobile Bluetooth laser scanner / laser imager battery is fully charged.
•
The MX7 batteries are fully charged. Alternatively, the MX7 may be in a powered cradle
or cabled to AC/DC power.
or cabled to AC/DC power.
•
The barcode numbering examples in this segment are not real and should not be created
nor scanned with a Bluetooth scanner.
nor scanned with a Bluetooth scanner.
•
To open the LXEZ Pairing program, tap Start | Settings | Control Panel | Bluetooth or tap
the Bluetooth icon on the desktop or tap the Bluetooth icon in the taskbar.
the Bluetooth icon on the desktop or tap the Bluetooth icon in the taskbar.
LnkB00440fd01020 - Sample
Figure 1-23 Sample Bluetooth Address Barcode Label
Locate the barcode label, similar to the one shown above, attached to the mobile device. The label
is the Bluetooth address identifier for the MX7.
is the Bluetooth address identifier for the MX7.
The mobile Bluetooth scanner / imager requires this information before discovering, pairing,
connecting or disconnecting can occur.
connecting or disconnecting can occur.
Important: The MX7 Bluetooth address identifier label should remain protected from damage
(rips, tears, spills, soiling, erasure, etc.) at all times. It may be required when pairing, connecting,
and disconnecting new Bluetooth barcode readers.
(rips, tears, spills, soiling, erasure, etc.) at all times. It may be required when pairing, connecting,
and disconnecting new Bluetooth barcode readers.
MX7 with Label
If the MX7 has a Bluetooth address barcode label attached, follow these steps:
1. Scan the Bluetooth address barcode label, attached to the MX7, with the LXE Bluetooth
mobile scanner.
2. If this is the first time the Bluetooth scanner has scanned the MX7 Bluetooth label, the
devices are paired. See section titled “Bluetooth Beep and LED Indications”. If the
devices do not pair successfully, go to the next step.
devices do not pair successfully, go to the next step.
3. Open the LXEZ Pairing panel (Start | Settings | Control Panel | Bluetooth).
4. Tap Discover. Locate the Bluetooth scanner in the Discovery panel.
5. Tap and hold the stylus on the Bluetooth scanner until the right-mouse-click menu
4. Tap Discover. Locate the Bluetooth scanner in the Discovery panel.
5. Tap and hold the stylus on the Bluetooth scanner until the right-mouse-click menu
appears.
6. Select Pair as Scanner to pair the MX7 with the Bluetooth mobile scanner.